Agriculture
Silicone Antifoam SF-40M
FEATURES
The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation.
Antifoaming agent component does not contain NP, APEO.
Fast defoaming speed in application system (normal temperature -80 ℃).
Good stability in alkaline environment (pH 8.0-11.0)
TYPICAL PROPERTIES
| Index | Result | Test Method |
| Appearance | White or yellowish uniform liquid emulsion, without irritating odor, any sediment and mechanical impurities |
GB/T 26527-2011 |
| pH | 6.5-8.5 | pH meter test solution |
| Nonvolatile Content（%） | 38.5±1.0 | GB/T 26527-2011 |
| Note: The information above is for reference and shall not be deemed as a technical indicator. | ||
HOW TO USE
SIXIN® SF-40M Antifoam can be diluted with thickening water. In the process of dilution, the speed of stirring is between 30 to 60 rpm and the time of stirring is recommended for no more than 10 minutes. Please request SIXIN for the specific dilution method. The company accepts no responsibility for any loss which may be incurred by the customer as a result of incorrect usage.
It is suggested that the product is added in a place where the antifoam can disperse easily.
PACKAGE AND STORAGE
The product is available in 25kg, 120kg and 1000kg plastic buckets; sizes can be customized according to special requirements. This product can be stored as a normal chemical, away from heat sources and direct sunlight. No exposure to rain. Keep away from flame. Don’t add acid, alkali, salt and other corrosive substances to this product. Ensure the container is sealed after using. If this product begins to stratify after long storage, stir it evenly at 30 to 60 rpm. This product may freeze under 0℃ (32℉); if this happens, stir well after defrosting the antifoam at a rate of 30 to 60 rpm. In these cases, stirring will not affect the performance of the product if carried out at the recommended speed. When stored between 5 and 40℃ (41-104℉) in the original unopened containers, the product is usable 9 months from the date of manufacture.
Please read carefully
The proposed application method of this product is for reference only. If it is not sure that the product is safe, effective, and fully satisfactory for the intended end use, please contact SIXIN directly. It is recommended that the customer conduct preliminary tests, ensuring product safety and effectiveness. Each customer has different system conditions. Please get in contact with the SIXIN Company if you are uncertain that your product is meeting guarantees.