Leave Your Message

Polyether Defoamer SP-200

SP-200 is a pure polyether product suitable for a wide range of white water temperatures (25-50°C). It requires a small dosage and is ideal for systems with high usage of both dry and wet strong additives. It offers rapid initial defoaming and superior anti-foaming performance in the later stages.

    FEATURES

    The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation.
    Antifoaming agent component does not contain NP, APEO.
    It is availability to mix it with other surfactant. Have good antifoam and foam-suppressing performance, emulsifying property and dispersing performance.
    Stable at a wide pH range (3.0-14.0)

    TYPICAL PROPERTIES

    Index Result Test Method
    Appearance Colorless to light yellow transparency  liquid at room temperature,
    without any impurities
    Ocular Estimate
    Viscosity(25℃) 100-400 GB/T 5561-2012
    Note: The information above is for reference and shall not be deemed as a technical indicator.

    HOW TO USE

    SIXIN® SP-200 Antifoam is Composed of various substances. Probably this product stratifies or has deposits after long placed and it is normal phenomenon. If it happens, stir the product evenly at 30rpm to 60rpm before using and it does not affect the performance of product. 
    This product can’t be diluted with water. If it is diluted with water, this product may appear stratified, finally lead to the cost increase, SIXIN Company accepts no responsibility.
     It is suggested the defoamer should be added direct pumping in the place where the defoamer is easy to disperse easily.

    PACKAGE AND STORAGE

    The product is available in 25kg, 200-kg plastic bucket,1000-kg ton bucket. This product should be stored in cool and dry place. Don’t near the heat source or sunlight. When stored between 5 and 40℃(41-104℉) in the original unopened containers, the product has a usable life of 12 months from the date of manufacture.

    Please read carefully

    The proposed application method of this product is for reference only. If it is not sure that the product is safe, effective, and fully satisfactory for the intended end use, please contact SIXIN directly. It is recommended that the customer conduct preliminary tests, ensuring product safety and effectiveness. Each customer has different system conditions. Please get in contact with the SIXIN Company if you are uncertain that your product is meeting guarantees. Our company can provide the SDS on request.

    leave your message

    Your Name

    Phone Number*

    Message*