Other Additives
Modified Silicone Wetting Agent SX-10SW
FEATURES
A large decrease in surface tension in aqueous systems and improving substrate wetting and leveling in particular.
Foam stabilization does not occur or only very minimally and recoatability is not affected.
No increase of surface slip and no VOC.
TYPICAL PROPERTIES
| Index | Result |
| appearance | yellow transparent liquid |
| active matter content | 90~100% |
| viscosity(25℃) | 20~500mpa.s |
| Density(25℃) | 0.90~1.10 g/ml |
| HLB | 6~7 |
HOW TO USE
As supplied calculatedon total formulation: 0.1 - 1%.
It is suggested that the product is added in a place where the defoamer can disperse easily.
PACKAGE AND STORAGE
The product is available in 25-kg, 200-kg plastic buckets or 1000kg ton drum. This product can be stored as a normal chemical, away from heat sources and direct sunlight. Don’t add acid, alkali, or salt to this product. Ensure the container is sealed after using.
If burning, put out the fire according to the extinguishing method for general petroleum products .When stored between 5 and 40℃ (41-104℉) in the original unopened containers, the product is usable 24 months from the date of manufacture.
Please read carefully
The proposed application method of this product is for reference only. If it is not sure that the product is safe, effective, and fully satisfactory for the intended end use, please contact SIXIN directly. It is recommended that the customer conduct preliminary tests, ensuring product safety and effectiveness. Each customer has different system conditions. Please get in contact with the SIXIN Company if you are uncertain that your product is meeting guarantees.